What is the best way to store panels with CLEANsafe coatings?

Panels with Kingspan CLEANsafe 120 coatings, both sheets and coils, must be stored in a and dry place, without sudden changes of temperature, in order to avoid the possibility of condensation. The presence of humidity may trigger a corrosion process dangerous for steel and its coating, but also for the adhesion of polyurethane. Material covered with the adhesive film for temporary protection must be stored away from heat sources and UV rays.

Can CLEANsafe coatings be repaired or painted if damaged?

To repair or paint the surfaces coated with PVC film, we recommend to use the following products: Water based acrylic enamels (for repairing or painting). Bi-component polyurethane enamels with volatile solvents (for repairing). Before applying the enamel, clean the surfaces with neutral detergents diluted with water or denatured alcohol, then rinse with soft water and dry accurately.

How do you clean Kingspan’s CLEANsafe coatings?

We recommend cleaning with soft water and neutral detergents, rinsing with care and drying the surface with a soft cloth. Please avoid the use of abrasive products. Small stains on the surface can be removed with mineral spirit or rubbing alcohol. Stains caused by the substances absorption (such as nail varnish, lipstick, shoe polish, ink, tar) cannot be eliminated.

CLEANsafe 120

CLEANsafe Coatings

CLEANsafe 120 is a chemically inert polyvinyl chloride (PVC) film, laminated to pre-treated metal, suitable for internal controlled environments.

Product Highlights

Food safety – suitable for surfaces immediately behind food preparation, processing surfaces or equipment
Easy to clean & wash down
Resistant to staining, mold growth and surface extraction
Excellent chemical and humidity corrosion resistance

Find a Sales Rep

Test	Norm	Result
Coating nominal thickness	-PVC rigid film -Thickness tolerance	100 m - 200 m ±7%
Adhesion afer 6mm drawing depth	ECCA T6	No film detachment
Resistence to bending	ECCA T7[1996]	½T
Resistance to rapid deformation	ASTM D 2794-93; (weight 2kg;height 0f fall 90 cm)	No detachment and breaking of film
Resistance to salt spray fog	ECCA T8:1996-ASTM B117-95 -Cold -rolled support -Hot-dip zinc support	200 hours 500 hours
Resistance to 100% relative humidity	ASTM D 2247-94	1000 hours
Pencil hardness	ECCA T4:1995 -ASTM D 3363-920	HB
Stain resistance after 16 h - Reagents	ECCA T18[1995] proc. 5.1-ASTM D 1308-87 Butter, margarine, vegetable oil, vinegar, fresh and conserved tomato, strawberries, coffe, tea, solution at 5% of NaoH, solution at 5% of surface active agents, lubricating oil and grease, solution at 10% of citric,lactic and tartaric acid ,oleic acid,spinach, lemon juice, mustard, cif cream, cif liquid, lysoform liquid	Presence of marks or stains on the area in contact with fresh tomato and coffee
Brightness at 60	ECCA T2[1995]-ASTM D 523-89 Finishing SA Finishing SMA Finishing GMA Finishing PVA	45 ± 5 25 ± 5 15 ± 5 30 ± 5
Note: glass value may be affected by embossing degree
Artificial light fastness -temperatue -lamps -cycle -referance	ASTM G53-96 55+_ 3 UV-A 340 Irradiance only international blue scale	>6
Taber abrasion resistance -index of abrasion after 1000 cycles with mole type CS10,weight 500g per mole	ASTM D4060-95 Finishing SA Finishing SMA Finishing PVA	13 -14 10-12 5 -8
Note:the tests were carried out at the temperature of 23+_1 C,beyond what was expressely required by reference norms

Standard metal support

Continuously hot-dip zinc coated low carbon for cold forming,
type DX51D (UNI EN 10346:June 2009).

Other available metal supports

Stainless steel - Part 1. List of the stainless steels (UNI EN 10088-1/97).

Coating

Anti-Bacterial, rigid polyvinylchloride (PVC) phthalates free. This film is suitable for contact with food and substances for personal use according to the Ministerial Decree 21st March 1973 and subsequent updatings and to the European Standards 78/142/CEE, 80/766/CEE, 82/711/CEE, 8 5/572/CEE, 90/128/CEE, 92/39CEE. This film is suitable for contact with food and substances for personal use according to the Ministerial Decree 21st March 1973 and subsequent updatings and to the European Standards 78/142/CEE, 80/766/CEE, 82/711/CEE, 85/572/CEE, 90/128/CEE, 92/39 CEE.